435-600 DBEM
435-600 DBEM
Spectral Curves
The spectral curve and ascii data is a typical representation of this filter’s performance, but will vary due to production and design variations. Omega only guarantees this part to meet the product specifications listed. The displayed OD is calculated from a %T measurement. The blocking regions are likely higher OD than what is displayed here. To learn more about the challenges of measuring high OD values, see our paper.
Download Data
Detailed Specifications
| Transmission |
≥ 80% avg 420-450nm & 550-640nm
|
| Blocking |
≥ OD6 300-400nm & 470-530nm ≥ OD3 660-1100nm
|
| Transmitted Wavefront Distortion |
≤ λ per inch
|
| Angle of Incidence |
0
|
| Minimum Surface Quality |
Assembly per MIL-C-48497A (F scratch/ F Dig)
|
| Coating Type |
Surface Coating
|
| Filter Type |
Dual Band
|
| Filter Application |
Dual Band
|
| Fluorescence Component |
Dual Band
|
| Flatness |
ns
|
| Parallelism |
≤ 15 arc seconds
|
| Cut-on Wavelength (nm) |
410.00
|
| Cut-off Wavelength (nm) |
460.00
|
| Cut-on Wavelength Tolerance |
+3/-3
|
| Cut-off Wavelength Tolerance |
+3/-3
|