570DRLP
570DRLP
Spectral Curves
The spectral curve and ascii data is a typical representation of this filter’s performance, but will vary due to production and design variations. Omega only guarantees this part to meet the product specifications listed. The displayed OD is calculated from a %T measurement. The blocking regions are likely higher OD than what is displayed here. To learn more about the challenges of measuring high OD values, see our paper.
Download Data
Detailed Specifications
| Transmission |
≥ 80% avg, 65% min 573-700nm
|
| Transmitted Wavefront Distortion |
λ/4 RMS in 80% CA
|
| Angle of Incidence |
45
|
| Minimum Surface Quality |
Surface per MIL-O-13830A (80/50)
|
| Coating Type |
Surface Coating
|
| Filter Type |
Dichroic
|
| Half-cone AOI |
0
|
| Fluorescence Component |
Dichroic
|
| Reflection |
≥ 90% avg, 517-552nm
|
| Flatness |
λ/2 RMS in 80% CA
|
| Parallelism |
≤ 15 arc seconds
|
| AR Coating |
As supplied by substrates
|
| Cut-on Wavelength (nm) |
565.00
|
| Cut-on Wavelength Tolerance |
Nominal
|