585ALP
585ALP
Spectral Curves
The spectral curve and ascii data is a typical representation of this filter’s performance, but will vary due to production and design variations. Omega only guarantees this part to meet the product specifications listed. The displayed OD is calculated from a %T measurement. The blocking regions are likely higher OD than what is displayed here. To learn more about the challenges of measuring high OD values, see our paper.
Download Data
Detailed Specifications
| Transmission |
≥ 80% avg to 850nm
|
| Blocking |
≥ OD5 UV-577nm
|
| Transmitted Wavefront Distortion |
λ/4 RMS in 80% of CA
|
| Angle of Incidence |
0
|
| Minimum Surface Quality |
Assembly per MIL-C-48497A (F scratch/ F Dig)
|
| Coating Type |
Protected Coating
|
| Filter Type |
Longpass
|
| Filter Application |
Longpass
|
| Half-cone AOI |
0
|
| Fluorescence Component |
Longpass
|
| Flatness |
λ/2 RMS in 80% of CA
|
| Parallelism |
≤ 15 arc seconds
|
| AR Coating |
BBAR on mask side
|
| Cut-on Wavelength (nm) |
585.00
|
| Cut-on Wavelength Tolerance |
+2/-2
|